feat: improve installer network setup

README.md

@@ -63,7 +63,7 @@ curl --proto '=https' --tlsv1.2 -fsSL https://git.awaioi.com/awaioi/TallyNote/ra
 curl --proto '=https' --tlsv1.2 -fsSL https://git.awaioi.com/awaioi/TallyNote/raw/branch/main/install.sh | sudo bash
 ```
 
-监听方式有两个选项：`127.0.0.1` 仅本机访问（默认、更安全），或 `0.0.0.0` 允许通过局域网/公网 IP 访问。选择 `0.0.0.0` 后，请填写真实访问地址，例如 `http://203.0.113.10:3000` 或 `https://tallynote.example.com`；不能填写 `http://0.0.0.0:3000`。直连 HTTP 未加密，安装器会要求明确确认，只适合受控网络。绑定域名后应改为 HTTPS 反向代理，设置真实的 `TALLYNOTE_PUBLIC_ORIGIN`、`TALLYNOTE_COOKIE_SECURE=true`、`TALLYNOTE_ALLOW_INSECURE_HTTP=false`，然后执行 `sudo systemctl restart tallynote.service`。
+监听方式有两个选项：`127.0.0.1` 仅本机访问（默认、更安全），或 `0.0.0.0` 允许通过局域网/公网 IP 访问。安装时可输入自定义端口（直接回车使用默认端口），安装器会检查 TCP 端口是否已被占用；选择 `0.0.0.0` 时会尝试通过 HTTPS 自动获取公网 IPv4，并将 `http://公网IP:端口` 作为默认访问地址，也可以改填域名。不能填写 `http://0.0.0.0:3000`。直连 HTTP 未加密，安装器会要求明确确认，只适合受控网络。绑定域名后应改为 HTTPS 反向代理，设置真实的 `TALLYNOTE_PUBLIC_ORIGIN`、`TALLYNOTE_COOKIE_SECURE=true`、`TALLYNOTE_ALLOW_INSECURE_HTTP=false`，然后执行 `sudo systemctl restart tallynote.service`。服务启动成功后，安装日志会输出最终访问链接。
 
 安装器不会在已有安装的升级过程中反复询问网络配置，并会保留现有环境文件。自动化或无终端环境可使用 `--non-interactive`（默认安全配置 `127.0.0.1:3000`），也可以显式传入 `TALLYNOTE_HOST`、`TALLYNOTE_PORT`、`TALLYNOTE_PUBLIC_ORIGIN` 和 `TALLYNOTE_ALLOW_INSECURE_HTTP` 覆盖配置。
 
@@ -98,6 +98,7 @@ tallynote installer: [完成] TallyNote 服务已启用并启动
 tallynote installer: [阶段] 清理旧版本并完成安装
 tallynote installer: [完成] 旧版本清理完成
 tallynote installer: [完成] 安装完成：TallyNote 1.1.2
+tallynote installer: 访问地址：http://127.0.0.1:3000
 tallynote installer: 查看服务状态：systemctl status tallynote.service
 ```
 

docs/release.md

@@ -38,7 +38,7 @@ GITEA_TOKEN=... \
 curl --proto '=https' --tlsv1.2 -fsSL https://git.awaioi.com/awaioi/TallyNote/raw/branch/main/install.sh | sudo bash
 ```
 
-首次在交互式 SSH/终端中执行时，安装器会在下载前询问监听方式、端口和公开访问地址。可选择仅本机监听 `127.0.0.1`，或监听 `0.0.0.0` 以允许通过真实服务器 IP/域名访问；公网 HTTP 必须在提示中明确确认，公开地址不能填写通配监听地址。已有安装升级时不会重复询问，并保留现有环境文件。无终端或 CI 使用 `--non-interactive`（默认 `127.0.0.1:3000`），也可通过 `TALLYNOTE_HOST`、`TALLYNOTE_PORT`、`TALLYNOTE_PUBLIC_ORIGIN` 和 `TALLYNOTE_ALLOW_INSECURE_HTTP` 显式配置。
+首次在交互式 SSH/终端中执行时，安装器会在下载前询问监听方式和端口（端口可直接回车使用默认值），并检查所选 TCP 端口是否已被占用。可选择仅本机监听 `127.0.0.1`，或监听 `0.0.0.0` 以允许通过真实服务器 IP/域名访问；选择公网监听时会尝试通过 HTTPS 自动获取公网 IPv4，将 `http://公网IP:端口` 作为默认访问地址，也可以手动改填域名。公网 HTTP 必须在提示中明确确认，公开地址不能填写通配监听地址。服务启动成功后，安装日志会输出最终访问链接。已有安装升级时不会重复询问，并保留现有环境文件。无终端或 CI 使用 `--non-interactive`（默认 `127.0.0.1:3000`），也可通过 `TALLYNOTE_HOST`、`TALLYNOTE_PORT`、`TALLYNOTE_PUBLIC_ORIGIN` 和 `TALLYNOTE_ALLOW_INSECURE_HTTP` 显式配置。
 
 非交互安装命令：
 
@@ -65,6 +65,7 @@ tallynote installer: [完成] TallyNote 服务已启用并启动
 tallynote installer: [阶段] 清理旧版本并完成安装
 tallynote installer: [完成] 旧版本清理完成
 tallynote installer: [完成] 安装完成：TallyNote <版本>
+tallynote installer: 访问地址：http://127.0.0.1:<端口>
 ```
 
 每个阶段完成时会输出 `[完成]`；错误会立即以 `tallynote installer:` 前缀输出，不会静默等待或切换半成品版本。

install.sh

@@ -41,7 +41,9 @@ INSTALL_HOST=${TALLYNOTE_HOST-127.0.0.1}
 INSTALL_PORT=${TALLYNOTE_PORT-3000}
 INSTALL_PUBLIC_ORIGIN=${TALLYNOTE_PUBLIC_ORIGIN-}
 INSTALL_ALLOW_INSECURE_HTTP=${TALLYNOTE_ALLOW_INSECURE_HTTP-false}
+PUBLIC_IP_URL=${TALLYNOTE_PUBLIC_IP_URL-}
 NON_INTERACTIVE=0
+NETWORK_INTERACTIVE=0
 
 # The production prompt uses the controlling terminal, even when the
 # installer itself is read from `curl | sudo bash`.
@@ -82,7 +84,9 @@ TALLYNOTE_INSTALL_REQUIRE_SIGNATURE=true and provide a public key. Use
 host. For direct IP access, pass TALLYNOTE_HOST=0.0.0.0 and an actual
 TALLYNOTE_PUBLIC_ORIGIN such as http://203.0.113.10:3000; HTTP also requires
 TALLYNOTE_ALLOW_INSECURE_HTTP=true. On a fresh terminal install, the listener
-and public URL can be selected interactively. Use --non-interactive (or
+and public URL can be selected interactively. The installer checks that the
+selected TCP port is free, suggests a public IPv4 address when exposing
+0.0.0.0, and prints the final access URL after the service starts. Use --non-interactive (or
 TALLYNOTE_NON_INTERACTIVE=true) for automation. --apply is accepted for
 backwards compatibility.
 EOF
@@ -111,6 +115,109 @@ prompt_value() {
   PROMPT_REPLY=${reply:-$default}
 }
 
+detect_public_ipv4() {
+  local endpoint value octet
+  local -a endpoints=()
+  if [[ -n "$PUBLIC_IP_URL" ]]; then
+    endpoints=("$PUBLIC_IP_URL")
+  else
+    # These services return the caller's address as plain text. HTTPS is
+    # required, and a failure simply falls back to manual address entry.
+    endpoints=(
+      'https://api.ipify.org'
+      'https://ifconfig.me/ip'
+      'https://checkip.amazonaws.com'
+    )
+  fi
+  command -v curl >/dev/null 2>&1 || return 1
+  for endpoint in "${endpoints[@]}"; do
+    [[ "$endpoint" == https://* && "$endpoint" != *[[:space:]]* && "$endpoint" != *[[:cntrl:]]* && "$endpoint" != *'@'* ]] || continue
+    value=$(curl -4 --proto '=https' --tlsv1.2 --fail --silent --show-error --max-redirs 0 \
+      --connect-timeout 4 --max-time 8 --max-filesize 128 "$endpoint" 2>/dev/null \
+      | tr -d '[:space:]') || continue
+    [[ "$value" =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}$ ]] || continue
+    IFS='.' read -r -a _public_ip_octets <<< "$value"
+    for octet in "${_public_ip_octets[@]}"; do
+      (( 10#$octet <= 255 )) || continue 2
+    done
+    printf '%s' "$value"
+    return 0
+  done
+  return 1
+}
+
+port_listener_state() {
+  local port=$1 output status=0
+  validate_listen_port "$port" >/dev/null 2>&1 || return 2
+
+  if command -v ss >/dev/null 2>&1; then
+    if output=$(ss -H -ltn 2>/dev/null); then
+      if awk -v port="$port" '$4 ~ (":" port "$") { found=1 } END { exit found ? 0 : 1 }' <<< "$output"; then
+        return 1
+      fi
+      return 0
+    fi
+  fi
+
+  if command -v lsof >/dev/null 2>&1; then
+    output=''
+    status=0
+    output=$(lsof -nP -iTCP:"$port" -sTCP:LISTEN -t 2>/dev/null) || status=$?
+    [[ -n "$output" ]] && return 1
+    [[ "$status" == 1 && -z "$output" ]] && return 0
+    [[ "$status" == 0 ]] && return 0
+  fi
+
+  if command -v netstat >/dev/null 2>&1; then
+    if output=$(netstat -lnt 2>/dev/null); then
+      if awk -v port="$port" '$6 == "LISTEN" && $4 ~ (":" port "$") { found=1 } END { exit found ? 0 : 1 }' <<< "$output"; then
+        return 1
+      fi
+      return 0
+    fi
+  fi
+
+  if command -v python3 >/dev/null 2>&1; then
+    python3 - "$port" <<'PY'
+import errno
+import socket
+import sys
+
+port = int(sys.argv[1])
+for family, address in ((socket.AF_INET, "0.0.0.0"), (socket.AF_INET6, "::")):
+    sock = socket.socket(family, socket.SOCK_STREAM)
+    try:
+        if family == socket.AF_INET6:
+            sock.setsockopt(socket.IPPROTO_IPV6, socket.IPV6_V6ONLY, 1)
+        sock.bind((address, port))
+    except OSError as error:
+        if error.errno == errno.EADDRINUSE:
+            sys.exit(1)
+    finally:
+        sock.close()
+sys.exit(0)
+PY
+    status=$?
+    case "$status" in
+      0) return 0 ;;
+      1) return 1 ;;
+    esac
+  fi
+
+  return 2
+}
+
+check_requested_port() {
+  local port=$1 state
+  state=0
+  port_listener_state "$port" || state=$?
+  case "$state" in
+    0) return 0 ;;
+    1) die "端口 ${port} 已被占用，请选择其他端口" ;;
+    *) die "无法检测端口 ${port} 是否被占用，请安装 ss、lsof、netstat 或 Python 3 后重试" ;;
+  esac
+}
+
 has_network_environment() {
   [[ -n "${TALLYNOTE_HOST+x}" || -n "${TALLYNOTE_PORT+x}" || -n "${TALLYNOTE_PUBLIC_ORIGIN+x}" || -n "${TALLYNOTE_ALLOW_INSECURE_HTTP+x}" ]]
 }
@@ -126,6 +233,7 @@ interactive_network_available() {
 
 configure_network_interactively() {
   interactive_network_available || return 0
+  NETWORK_INTERACTIVE=1
 
   exec 9<"$PROMPT_INPUT" || die '无法打开终端输入；请使用 --non-interactive 或通过环境变量配置'
 
@@ -136,7 +244,7 @@ configure_network_interactively() {
     printf '  2) 局域网/公网访问：0.0.0.0（需要填写实际访问地址）\n'
   } > "$PROMPT_OUTPUT"
 
-  local choice selected_port origin answer
+  local choice selected_port origin answer port_state detected_ip default_origin
   while :; do
     prompt_value '请选择监听方式 1/2' '1'
     choice=$PROMPT_REPLY
@@ -150,6 +258,17 @@ configure_network_interactively() {
     prompt_value '监听端口' "$INSTALL_PORT"
     selected_port=$PROMPT_REPLY
     if [[ "$selected_port" =~ ^[1-9][0-9]*$ && "$selected_port" -le 65535 ]]; then
+      # A real terminal can reject an occupied port immediately. The final
+      # check in main() runs again after old services have been stopped.
+      if [[ -t 9 ]]; then
+        port_state=0
+        port_listener_state "$selected_port" || port_state=$?
+        case "$port_state" in
+          0) break ;;
+          1) printf '端口 %s 已被占用，请输入其他端口。\n' "$selected_port" > "$PROMPT_OUTPUT"; continue ;;
+          *) printf '暂时无法预检端口，安装前还会再次检查。\n' > "$PROMPT_OUTPUT"; break ;;
+        esac
+      fi
       break
     fi
     printf '端口必须是 1-65535 的整数，请重试。\n' > "$PROMPT_OUTPUT"
@@ -163,8 +282,21 @@ configure_network_interactively() {
   else
     INSTALL_HOST=0.0.0.0
     INSTALL_PORT=$selected_port
+    detected_ip=''
+    # Test fixtures replace /dev/tty with regular files; avoid making their
+    # behavior depend on an external IP lookup service.
+    if [[ -t 9 ]]; then
+      detected_ip=$(detect_public_ipv4 || true)
+    fi
+    if [[ -n "$detected_ip" ]]; then
+      default_origin="http://${detected_ip}:${selected_port}"
+      printf '已探测公网 IPv4：%s\n' "$detected_ip" > "$PROMPT_OUTPUT"
+    else
+      default_origin=''
+      printf '未能自动获取公网 IPv4，请手动填写访问地址。\n' > "$PROMPT_OUTPUT"
+    fi
     while :; do
-      prompt_value '实际访问地址（例如 http://203.0.113.10:3000 或 https://tallynote.example.com）' ''
+      prompt_value '实际访问地址（回车使用自动探测地址，也可填写域名）' "$default_origin"
       origin=$PROMPT_REPLY
       if validate_env_value "$origin" '公开访问地址' >/dev/null 2>&1 && validate_public_origin "$origin" >/dev/null 2>&1; then
         INSTALL_PUBLIC_ORIGIN=$origin
@@ -753,7 +885,7 @@ validate_listen_host() {
     local octet
     IFS='.' read -r -a _host_octets <<< "$value"
     for octet in "${_host_octets[@]}"; do
-      (( octet <= 255 )) || die "$label 必须是有效的 IPv4 地址或主机名"
+      (( 10#$octet <= 255 )) || die "$label 必须是有效的 IPv4 地址或主机名"
     done
   else
     [[ "$value" =~ ^[A-Za-z0-9]([A-Za-z0-9.-]*[A-Za-z0-9])?$ ]] || die "$label 必须是有效的 IPv4、IPv6 地址或主机名"
@@ -794,7 +926,7 @@ validate_public_origin() {
   fi
   [[ -n "$host" ]] || die '公开访问地址缺少主机名'
   [[ "$host" != 0.0.0.0 && "$host" != :: && "$host" != \* ]] || die '公开访问地址不能使用通配监听地址，请填写服务器 IP 或域名'
-  [[ "$host" =~ ^[A-Za-z0-9.-]+$ || "$host" =~ ^[0-9A-Fa-f:]+$ ]] || die '公开访问地址主机名无效'
+  validate_listen_host "$host" '公开访问地址主机'
   if [[ -n "$origin_port" ]]; then
     [[ "$origin_port" =~ ^[0-9]{1,5}$ && "$origin_port" -ge 1 && "$origin_port" -le 65535 ]] || die '公开访问地址端口必须是 1-65535 的整数'
   fi
@@ -867,24 +999,26 @@ validate_existing_env() {
     origin=$(read_env_value "$file" TALLYNOTE_PUBLIC_ORIGIN)
     validate_env_value "$origin" '环境文件中的公开访问地址'
   else
-    origin="http://${host}:${port}"
+    local origin_host=$host
+    [[ "$origin_host" == *:* && "$origin_host" != \[* ]] && origin_host="[$origin_host]"
+    origin="http://${origin_host}:${port}"
   fi
   validate_public_origin "$origin"
-  local origin_host=${origin#*://}
-  if [[ "$origin_host" == \[*\]* ]]; then
-    origin_host=${origin_host#\[}
-    origin_host=${origin_host%%\]*}
+  local origin_host_for_policy=${origin#*://}
+  if [[ "$origin_host_for_policy" == \[*\]* ]]; then
+    origin_host_for_policy=${origin_host_for_policy#\[}
+    origin_host_for_policy=${origin_host_for_policy%%\]*}
   else
-    origin_host=${origin_host%%:*}
+    origin_host_for_policy=${origin_host_for_policy%%:*}
   fi
   if [[ "$origin" == http://* && "$allow_insecure" != true ]]; then
-    case "$origin_host" in
+    case "$origin_host_for_policy" in
       127.0.0.1|localhost|::1) ;;
       *) die '环境文件中的公网 HTTP 访问必须显式设置 TALLYNOTE_ALLOW_INSECURE_HTTP=true' ;;
     esac
   fi
   if [[ "$origin" == http://* && "$cookie_secure" == true ]]; then
-    case "$origin_host" in
+    case "$origin_host_for_policy" in
       127.0.0.1|localhost|::1) ;;
       *) die '环境文件中的公网 HTTP 公开地址不能启用安全 Cookie' ;;
     esac
@@ -973,6 +1107,9 @@ main() {
   configure_network_interactively
   validate_listen_host "$INSTALL_HOST"
   validate_listen_port "$INSTALL_PORT"
+  if (( APPLY && NETWORK_INTERACTIVE )); then
+    check_requested_port "$INSTALL_PORT"
+  fi
   if [[ -n "${TALLYNOTE_PUBLIC_ORIGIN+x}" && -z "$INSTALL_PUBLIC_ORIGIN" ]]; then
     die 'TALLYNOTE_PUBLIC_ORIGIN 不能是空值；省略该变量以使用默认 Origin'
   fi
@@ -1115,6 +1252,15 @@ main() {
   if [[ -e "$CONFIG_DIR/tallynote.env" ]]; then
     validate_existing_env "$CONFIG_DIR/tallynote.env"
   fi
+  # During upgrades, the existing environment remains authoritative unless a
+  # new port was explicitly supplied. Check the effective listener port after
+  # stopping the old service so an unrelated process cannot claim it.
+  local effective_port=$INSTALL_PORT
+  if [[ -z "${TALLYNOTE_PORT+x}" && -f "$CONFIG_DIR/tallynote.env" ]]; then
+    effective_port=$(read_env_value "$CONFIG_DIR/tallynote.env" TALLYNOTE_PORT 2>/dev/null || true)
+    effective_port=${effective_port:-3000}
+  fi
+  check_requested_port "$effective_port"
   stage_done '目录、权限和旧服务状态已准备'
   stage "解包、校验包结构并原子切换到版本 ${VERSION#v}"
   install_release "$archive" "$VERSION"
@@ -1228,6 +1374,21 @@ main() {
   rm -rf -- "$INSTALL_WORK_DIR" 2>/dev/null || true
   INSTALL_WORK_DIR=''
   stage_done "安装完成：TallyNote ${VERSION#v}"
+  local access_url access_host access_port configured_host configured_port
+  access_url=$(read_env_value "$CONFIG_DIR/tallynote.env" TALLYNOTE_PUBLIC_ORIGIN 2>/dev/null || true)
+  if [[ -z "$access_url" ]]; then
+    configured_host=$(read_env_value "$CONFIG_DIR/tallynote.env" TALLYNOTE_HOST 2>/dev/null || true)
+    configured_port=$(read_env_value "$CONFIG_DIR/tallynote.env" TALLYNOTE_PORT 2>/dev/null || true)
+    access_host=${configured_host:-$INSTALL_HOST}
+    access_port=${configured_port:-$INSTALL_PORT}
+    if [[ "$access_host" == 0.0.0.0 ]]; then
+      access_host=$(detect_public_ipv4 || true)
+    fi
+    [[ -n "$access_host" ]] || access_host=$INSTALL_HOST
+    [[ "$access_host" == *:* && "$access_host" != \[* ]] && access_host="[$access_host]"
+    access_url="http://${access_host}:${access_port}"
+  fi
+  log "访问地址：$access_url"
   log '查看服务状态：systemctl status tallynote.service'
 }
 main "$@"

package.json

@@ -1,6 +1,6 @@
 {
   "name": "tallynote",
-  "version": "1.1.6",
+  "version": "1.1.7",
   "private": true,
   "type": "module",
   "packageManager": "pnpm@9.0.6",

scripts/test-installer.sh

@@ -85,6 +85,62 @@ bash -c '
   fi
 ' _ "$installer_lib" "$tmp/mode" "$tmp/user-parent"
 
+# The port probe must distinguish a listening TCP port from a free one.
+port_tools="$tmp/port-tools"
+mkdir -p "$port_tools"
+printf '%s\n' '#!/usr/bin/env bash' 'printf "%s\\n" "LISTEN 0 128 127.0.0.1:3443 0.0.0.0:*"' > "$port_tools/ss"
+chmod 755 "$port_tools/ss"
+bash -c '
+  script=$1
+  tools=$2
+  set --
+  source "$script"
+  PATH="$tools:$PATH"
+  state=0
+  port_listener_state 3443 || state=$?
+  [[ "$state" == 1 ]]
+  state=0
+  port_listener_state 3444 || state=$?
+  [[ "$state" == 0 ]]
+' _ "$installer_lib" "$port_tools"
+
+# The lsof fallback must treat its normal "no matches" exit status as a free
+# port, while still reporting a listener when it returns a PID.
+lsof_tools="$tmp/lsof-tools"
+mkdir -p "$lsof_tools"
+printf '%s\n' '#!/usr/bin/env bash' 'exit 127' > "$lsof_tools/ss"
+printf '%s\n' '#!/usr/bin/env bash' 'case "$*" in *TCP:3443*) printf "%s\\n" 4242; exit 0 ;; *) exit 1 ;; esac' > "$lsof_tools/lsof"
+chmod 755 "$lsof_tools/ss" "$lsof_tools/lsof"
+bash -c '
+  script=$1
+  tools=$2
+  set --
+  source "$script"
+  PATH="$tools:$PATH"
+  state=0
+  port_listener_state 3443 || state=$?
+  [[ "$state" == 1 ]]
+  state=0
+  port_listener_state 3444 || state=$?
+  [[ "$state" == 0 ]]
+' _ "$installer_lib" "$lsof_tools"
+
+# Public-IP discovery accepts a valid IPv4 response and rejects malformed
+# values without making the test depend on an external service.
+bash -c '
+  script=$1
+  set --
+  source "$script"
+  PUBLIC_IP_URL=https://ip.example.test
+  curl() { printf "%s\\n" "198.51.100.7"; }
+  [[ "$(detect_public_ipv4)" == "198.51.100.7" ]]
+  curl() { printf "%s\\n" "999.1.1.1"; }
+  if detect_public_ipv4 >/dev/null 2>&1; then
+    echo "expected invalid public IPv4 response to fail" >&2
+    exit 1
+  fi
+' _ "$installer_lib"
+
 # Duplicate security-sensitive EnvironmentFile assignments are rejected even
 # when the first value looks valid (systemd uses the later value).
 duplicate_env="$tmp/duplicate.env"
@@ -183,6 +239,20 @@ bash -c '
   stat_mode_bits() { printf "384"; }
   validate_existing_env "$env_file"
 ' _ "$installer_lib" "$tmp/public-https.env"
+printf '%s\n' \
+  'TALLYNOTE_HOST=::1' \
+  'TALLYNOTE_PORT=3443' > "$tmp/ipv6-default-origin.env"
+bash -c '
+  script=$1
+  env_file=$2
+  set --
+  source "$script"
+  PREFIX=/opt/tallynote
+  DATA_DIR=/var/lib/tallynote
+  stat_uid() { printf "0"; }
+  stat_mode_bits() { printf "384"; }
+  validate_existing_env "$env_file"
+' _ "$installer_lib" "$tmp/ipv6-default-origin.env"
 if bash -c '
   script=$1
   set --

tests/update-api.test.ts

@@ -59,10 +59,10 @@ describe("更新 API", () => {
 
   function mockRelease() {
     const digest = "c".repeat(64);
-    const asset = `tallynote-1.1.7-${detectPlatform().target}-glibc.tar.gz`;
+    const asset = `tallynote-1.1.8-${detectPlatform().target}-glibc.tar.gz`;
     globalThis.fetch = (async (input: string | URL) => input.toString().endsWith("SHA256SUMS")
       ? new Response(`${digest}  ${asset}\n`, { status: 200 })
-      : new Response(JSON.stringify({ tag_name: "v1.1.7", assets: [{ name: "SHA256SUMS", browser_download_url: "https://updates.example/SHA256SUMS" }, { name: asset, browser_download_url: `https://updates.example/${asset}` }] }), { status: 200 })) as typeof fetch;
+      : new Response(JSON.stringify({ tag_name: "v1.1.8", assets: [{ name: "SHA256SUMS", browser_download_url: "https://updates.example/SHA256SUMS" }, { name: asset, browser_download_url: `https://updates.example/${asset}` }] }), { status: 200 })) as typeof fetch;
   }
 
   it("检查 release、创建受保护请求文件并拒绝重复任务", async () => {
@@ -70,21 +70,21 @@ describe("更新 API", () => {
     mockRelease();
     const checked = await app.inject({ method: "POST", url: "/api/update/check", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: {} });
     expect(checked.statusCode).toBe(200);
-    expect(checked.json().latest).toMatchObject({ version: "1.1.7", compatible: true, integrityReady: true, isNewer: true });
+    expect(checked.json().latest).toMatchObject({ version: "1.1.8", compatible: true, integrityReady: true, isNewer: true });
     expect(checked.headers["cache-control"]).toBe("no-store");
     const tooSoon = await app.inject({ method: "POST", url: "/api/update/check", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: {} });
     expect(tooSoon.statusCode).toBe(429);
     expect(tooSoon.headers["retry-after"]).toBeDefined();
 
-    const applied = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { version: "1.1.7", confirm: true } });
+    const applied = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { version: "1.1.8", confirm: true } });
     expect(applied.statusCode).toBe(202);
     const jobId = applied.json().job.id as string;
     const request = JSON.parse(readFileSync(config.updateRequestPath, "utf8")) as { jobId: string; expectedSha256: string; currentLink: string };
-    expect(request).toMatchObject({ jobId, version: "1.1.7", expectedSha256: "c".repeat(64), currentLink: config.currentLink });
+    expect(request).toMatchObject({ jobId, version: "1.1.8", expectedSha256: "c".repeat(64), currentLink: config.currentLink });
     expect(statSync(config.updateRequestPath).mode & 0o777).toBe(0o600);
 
     mockRelease();
-    const duplicate = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { version: "1.1.7", confirm: true } });
+    const duplicate = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { version: "1.1.8", confirm: true } });
     expect(duplicate.statusCode).toBe(409);
     expect(duplicate.json().error.code).toBe("UPDATE_IN_PROGRESS");
     const status = await app.inject({ method: "GET", url: "/api/update/status", headers: { cookie: session.cookies } });
@@ -98,10 +98,10 @@ describe("更新 API", () => {
     mockRelease();
     const checked = await app.inject({ method: "POST", url: "/api/update/check", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: {} });
     expect(checked.statusCode).toBe(200);
-    const downloaded = await app.inject({ method: "POST", url: "/api/update/download", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { version: "1.1.7", confirm: true } });
+    const downloaded = await app.inject({ method: "POST", url: "/api/update/download", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { version: "1.1.8", confirm: true } });
     expect(downloaded.statusCode).toBe(202);
     const downloadJobId = downloaded.json().job.id as string;
-    expect(downloaded.json().job).toMatchObject({ operation: "download", status: "queued", version: "1.1.7" });
+    expect(downloaded.json().job).toMatchObject({ operation: "download", status: "queued", version: "1.1.8" });
     const downloadRequest = JSON.parse(readFileSync(config.updateRequestPath, "utf8")) as { jobId: string; operation: string };
     expect(downloadRequest).toMatchObject({ jobId: downloadJobId, operation: "download" });
     expect(database.sqlite.prepare("SELECT operation, status FROM update_jobs WHERE id=?").get(downloadJobId)).toEqual({ operation: "download", status: "queued" });
@@ -110,21 +110,21 @@ describe("更新 API", () => {
     const stagedId = randomUUID();
     const now = Date.now();
     database.sqlite.prepare(`INSERT INTO update_jobs(id, admin_id, session_hash, request_id, requested_at, operation, status, version, platform, release_url, asset_name, asset_url, expected_sha256, actual_sha256, download_path, created_at, updated_at) VALUES (?, ?, ?, ?, ?, 'download', 'staged', ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)`)
-      .run(stagedId, (await database.sqlite.prepare("SELECT id FROM admins WHERE username=?").get("update-staged") as { id: string }).id, "session", "staged-request", now, "1.1.7", detectPlatform().target, config.updateMetadataUrl, "release.tar.gz", "https://updates.example/release.tar.gz", "c".repeat(64), "c".repeat(64), path.join(config.dataDir, "staged-workspace"), now, now);
-    const applied = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { jobId: stagedId, version: "1.1.7", confirm: true } });
+      .run(stagedId, (await database.sqlite.prepare("SELECT id FROM admins WHERE username=?").get("update-staged") as { id: string }).id, "session", "staged-request", now, "1.1.8", detectPlatform().target, config.updateMetadataUrl, "release.tar.gz", "https://updates.example/release.tar.gz", "c".repeat(64), "c".repeat(64), path.join(config.dataDir, "staged-workspace"), now, now);
+    const applied = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { jobId: stagedId, version: "1.1.8", confirm: true } });
     expect(applied.statusCode).toBe(202);
     expect(applied.json().job).toMatchObject({ id: stagedId, operation: "apply", status: "staged" });
     expect(database.sqlite.prepare("SELECT operation, status FROM update_jobs WHERE id=?").get(stagedId)).toEqual({ operation: "apply", status: "staged" });
     const applyRequest = JSON.parse(readFileSync(config.updateRequestPath, "utf8")) as { jobId: string; operation: string; assetUrl: string; expectedSha256: string };
     expect(applyRequest).toMatchObject({ jobId: stagedId, operation: "apply", assetUrl: "https://updates.example/release.tar.gz", expectedSha256: "c".repeat(64) });
-    const duplicate = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { jobId: stagedId, version: "1.1.7", confirm: true } });
+    const duplicate = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { jobId: stagedId, version: "1.1.8", confirm: true } });
     expect(duplicate.statusCode).toBe(409);
     expect(duplicate.json().error.code).toBe("UPDATE_IN_PROGRESS");
   });
 
   it("缺少确认或未启用 systemd 时不接受更新", async () => {
     const session = await login();
-    const invalid = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { version: "1.1.7" } });
+    const invalid = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { version: "1.1.8" } });
     expect(invalid.statusCode).toBe(400);
     process.env.TALLYNOTE_UPDATE_STRATEGY = "disabled";
     const disabledConfig = loadConfig();
@@ -137,7 +137,7 @@ describe("更新 API", () => {
     mockRelease();
     const checked = await app.inject({ method: "POST", url: "/api/update/check", headers: { origin: config.publicOrigin, cookie: owner.cookies, "x-csrf-token": owner.csrf }, payload: {} });
     expect(checked.statusCode).toBe(200);
-    const applied = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: owner.cookies, "x-csrf-token": owner.csrf }, payload: { version: "1.1.7", confirm: true } });
+    const applied = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: owner.cookies, "x-csrf-token": owner.csrf }, payload: { version: "1.1.8", confirm: true } });
     expect(applied.statusCode).toBe(202);
     const jobId = applied.json().job.id as string;
     database.sqlite.prepare("UPDATE update_jobs SET error_message=? WHERE id=?").run("/var/lib/tallynote/secret-command-output", jobId);
@@ -155,7 +155,7 @@ describe("更新 API", () => {
   it("应用前重新校验失败时写入失败审计", async () => {
     const session = await login("update-audit");
     globalThis.fetch = (async () => new Response("upstream unavailable", { status: 503 })) as typeof fetch;
-    const response = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { version: "1.1.7", confirm: true } });
+    const response = await app.inject({ method: "POST", url: "/api/update/apply", headers: { origin: config.publicOrigin, cookie: session.cookies, "x-csrf-token": session.csrf }, payload: { version: "1.1.8", confirm: true } });
     expect(response.statusCode).toBe(502);
     const audit = database.sqlite.prepare("SELECT outcome FROM audit_events WHERE action='update.apply_requested' ORDER BY id DESC LIMIT 1").get() as { outcome: string } | undefined;
     expect(audit?.outcome).toBe("failure");

tests/update.test.ts

@@ -273,17 +273,17 @@ describe("更新元数据缓存", () => {
     prepareDataDirectories(config);
     const database = openDatabase(config);
     const digest = "b".repeat(64);
-    const platformAsset = `tallynote-1.1.7-${detectPlatform().target}-glibc.tar.gz`;
+    const platformAsset = `tallynote-1.1.8-${detectPlatform().target}-glibc.tar.gz`;
     const sums = `${digest}  ${platformAsset}\n`;
     const signature = sign(null, Buffer.from(sums), privateKey);
     globalThis.fetch = (async (input: string | URL) => input.toString().endsWith("SHA256SUMS.sig")
       ? new Response(signature)
       : input.toString().endsWith("SHA256SUMS")
       ? new Response(sums)
-      : new Response(JSON.stringify({ tag_name: "v1.1.7", published_at: "2026-08-28T00:00:00Z", assets: [{ name: "SHA256SUMS", browser_download_url: "https://updates.example/SHA256SUMS" }, { name: "SHA256SUMS.sig", browser_download_url: "https://updates.example/SHA256SUMS.sig" }, { name: platformAsset, browser_download_url: `https://updates.example/${platformAsset}` }] }), { status: 200 })) as typeof fetch;
+      : new Response(JSON.stringify({ tag_name: "v1.1.8", published_at: "2026-08-28T00:00:00Z", assets: [{ name: "SHA256SUMS", browser_download_url: "https://updates.example/SHA256SUMS" }, { name: "SHA256SUMS.sig", browser_download_url: "https://updates.example/SHA256SUMS.sig" }, { name: platformAsset, browser_download_url: `https://updates.example/${platformAsset}` }] }), { status: 200 })) as typeof fetch;
     try {
       const result = await checkForUpdate(database.sqlite, config);
-      expect(result.latest).toMatchObject({ version: "1.1.7", compatible: true, integrityReady: true, signatureReady: true, isNewer: true });
+      expect(result.latest).toMatchObject({ version: "1.1.8", compatible: true, integrityReady: true, signatureReady: true, isNewer: true });
       const cached = database.sqlite.prepare("SELECT value FROM system_settings WHERE key='update.release.v1'").get() as { value: string };
       expect(JSON.parse(cached.value).asset.sha256).toBe(digest);
     } finally {