fix: center navigation wordmark

README.md

@@ -23,7 +23,6 @@ TallyNote_报销资料_xxxxxxxx.zip
 
 ```bash
 pnpm install
-pnpm admin:init
 pnpm dev
 ```
 
@@ -43,7 +42,7 @@ pnpm build:next
 
 `build:next` 与 `pnpm build` 一样输出到 `dist/web`，可直接由生产 Fastify 服务提供。
 
-首次初始化会要求交互式输入管理员密码。也可以使用 `pnpm admin:init -- --username admin --display-name 管理员 --generate` 生成一次性临时密码。
+本地开发首次初始化管理员使用 `pnpm admin:init`。生产安装器会在首次安装时提供管理员初始化向导；如果选择稍后创建，执行 `sudo tallynote-admin-init` 即可。也可以使用 `sudo tallynote-admin-init --username admin --display-name 管理员 --generate` 生成一次性临时密码。
 
 默认地址为 `http://127.0.0.1:3000`，开发界面为 `http://127.0.0.1:5173`。配置项见 `.env.example`。
 
@@ -51,7 +50,7 @@ pnpm build:next
 
 安装器正式支持 **Linux x86_64（x64）**，脚本和运行时也支持在对应原生 runner 上发布 **aarch64（arm64）**；当前仓库内置 workflow 只生成 x64，arm64 需要在原生 ARM64 runner 上单独构建并发布。ARMv7/ARM32 仅实验性支持；Linux x86 32 位（`i386`、`i686`、`ia32`）明确不支持，因为 Node.js 24 和项目原生依赖没有可维护的官方构建。不要在 32 位系统上强行安装。
 
-发布包必须包含 `dist/`、生产依赖、匹配架构的 Node runtime、systemd 单元、`uninstall.sh`，以及 `SHA256SUMS`。签名文件 `SHA256SUMS.sig` 是可选增强校验，不需要为普通安装准备公钥。安装器默认直接安装最新版本：
+发布包必须包含 `dist/`（包括 `dist/server/cli/admin-init.js`）、生产依赖、匹配架构的 Node runtime、systemd 单元、`bin/tallynote-admin-init`、`uninstall.sh`，以及 `SHA256SUMS`。签名文件 `SHA256SUMS.sig` 是可选增强校验，不需要为普通安装准备公钥。安装器默认直接安装最新版本：
 
 ```bash
 curl --proto '=https' --tlsv1.2 -fsSL https://git.awaioi.com/awaioi/TallyNote/raw/branch/main/install.sh | sudo bash
@@ -63,6 +62,8 @@ curl --proto '=https' --tlsv1.2 -fsSL https://git.awaioi.com/awaioi/TallyNote/ra
 curl --proto '=https' --tlsv1.2 -fsSL https://git.awaioi.com/awaioi/TallyNote/raw/branch/main/install.sh | sudo bash
 ```
 
+首次安装完成网络配置后，向导会询问是否立即创建管理员。选择创建时，用户名、显示名称和密码都在当前 SSH 终端中输入；选择稍后创建也不会阻塞服务启动，之后执行 `sudo tallynote-admin-init` 即可。升级已有安装时，向导会自动识别现有管理员并跳过创建，不会覆盖账号或账目。
+
 监听方式有两个选项：`127.0.0.1` 仅本机访问（默认、更安全），或 `0.0.0.0` 允许通过局域网/公网 IP 访问。安装时可输入自定义端口（直接回车使用默认端口），安装器会检查 TCP 端口是否已被占用；选择 `0.0.0.0` 时会尝试通过 HTTPS 自动获取公网 IPv4，并将 `http://公网IP:端口` 作为默认访问地址，也可以改填域名。不能填写 `http://0.0.0.0:3000`。直连 HTTP 未加密，安装器会要求明确确认，只适合受控网络。绑定域名后应改为 HTTPS 反向代理，设置真实的 `TALLYNOTE_PUBLIC_ORIGIN`、`TALLYNOTE_COOKIE_SECURE=true`、`TALLYNOTE_ALLOW_INSECURE_HTTP=false`，然后执行 `sudo systemctl restart tallynote.service`。服务启动后，安装器会先请求本机 `/health`；只有健康检查通过才会报告安装完成并输出最终访问链接。监听 `127.0.0.1` 时该链接只对服务器本机有效；需要公网或其他设备访问时请选择 `0.0.0.0`。健康检查失败时会输出 systemd 状态和最近日志并回滚本次切换。
 
 安装器不会在已有安装的升级过程中反复询问网络配置，并会保留现有环境文件。自动化或无终端环境可使用 `--non-interactive`（默认安全配置 `127.0.0.1:3000`），也可以显式传入 `TALLYNOTE_HOST`、`TALLYNOTE_PORT`、`TALLYNOTE_PUBLIC_ORIGIN` 和 `TALLYNOTE_ALLOW_INSECURE_HTTP` 覆盖配置。
@@ -119,7 +120,7 @@ tallynote installer: 查看服务状态：systemctl status tallynote.service
 
 ### 卸载
 
-安装完成后会提供 `/usr/local/sbin/tallynote-uninstall`。普通卸载会停止并禁用 TallyNote 的 systemd 单元，删除当前版本、更新辅助程序和已知配置，但保留 `/var/lib/tallynote` 以及更新备份，方便以后重新安装：
+安装完成后会提供 `/usr/local/sbin/tallynote-admin-init` 和 `/usr/local/sbin/tallynote-uninstall`。普通卸载会停止并禁用 TallyNote 的 systemd 单元，删除当前版本、更新辅助程序、管理员初始化命令和已知配置，但保留 `/var/lib/tallynote` 以及更新备份，方便以后重新安装：
 
 ```bash
 sudo /usr/local/sbin/tallynote-uninstall

bin/tallynote-admin-init

@@ -0,0 +1,149 @@
+#!/usr/bin/env bash
+set -Eeuo pipefail
+
+# Production entry point for first-admin setup. The installer keeps the
+# EnvironmentFile root-readable only, so parse simple KEY=VALUE assignments
+# without sourcing arbitrary shell code.
+PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/bin
+export PATH
+umask 077
+
+CONFIG_DIR=${TALLYNOTE_CONFIG_DIR:-/etc/tallynote}
+CONFIG_FILE="$CONFIG_DIR/tallynote.env"
+PREFIX=${TALLYNOTE_INSTALL_PREFIX:-/opt/tallynote}
+SERVICE_NAME=${TALLYNOTE_SERVICE_NAME:-tallynote.service}
+
+die() { printf 'tallynote admin-init: %s\n' "$*" >&2; exit 1; }
+
+load_environment_file() {
+  [[ -e "$CONFIG_FILE" ]] || return 0
+  [[ -f "$CONFIG_FILE" && ! -L "$CONFIG_FILE" ]] || die '环境文件不是安全的普通文件'
+  local uid mode_bits line key value
+  uid=$(stat -c '%u' "$CONFIG_FILE" 2>/dev/null || stat -f '%u' "$CONFIG_FILE")
+  [[ "$uid" == 0 ]] || die '环境文件必须由 root 拥有'
+  mode_bits=$(stat -c '%a' "$CONFIG_FILE" 2>/dev/null || stat -f '%Lp' "$CONFIG_FILE")
+  [[ "$mode_bits" =~ ^[0-7]+$ ]] || die '无法读取环境文件权限'
+  (( (8#$mode_bits & 18) == 0 )) || die '环境文件不能被组或其他用户写入'
+
+  while IFS= read -r line || [[ -n "$line" ]]; do
+    [[ -z "$line" || "$line" == \#* ]] && continue
+    [[ "$line" =~ ^([A-Z][A-Z0-9_]*)=(.*)$ ]] || die '环境文件包含无法识别的配置行'
+    key=${BASH_REMATCH[1]}
+    value=${BASH_REMATCH[2]}
+    [[ "$value" != *$'\n'* && "$value" != *$'\r'* ]] || die "环境文件中的 $key 包含控制字符"
+    export "$key=$value"
+  done < "$CONFIG_FILE"
+  PREFIX=${TALLYNOTE_INSTALL_PREFIX:-$PREFIX}
+}
+
+resolve_release_root() {
+  local root prefix_root
+  [[ "$PREFIX" = /* && "$PREFIX" != *$'\n'* && "$PREFIX" != *$'\r'* ]] || die '安装目录无效'
+  [[ -L "$PREFIX/current" ]] || die '当前 release 链接不存在'
+  prefix_root=$(readlink -f -- "$PREFIX" 2>/dev/null || realpath "$PREFIX" 2>/dev/null || true)
+  [[ -n "$prefix_root" && -d "$prefix_root" && ! -L "$prefix_root" ]] || die '安装目录不安全'
+  root=$(readlink -f -- "$PREFIX/current" 2>/dev/null || realpath "$PREFIX/current" 2>/dev/null || true)
+  [[ -n "$root" && "$root" == "$prefix_root/releases/"* && -d "$root" && ! -L "$root" ]] || die '当前 release 链接不安全'
+  printf '%s' "$root"
+}
+
+run_as_service_user() {
+  local root=$1 node=$2 cli=$3
+  if [[ "${EUID:-$(id -u)}" == 0 ]]; then
+    local service_uid
+    service_uid=$(id -u tallynote 2>/dev/null) || die '找不到 tallynote 服务用户，拒绝以 root 身份执行管理员初始化'
+    [[ "$service_uid" =~ ^[1-9][0-9]*$ ]] || die 'tallynote 服务用户 UID 无效，拒绝以 root 身份执行管理员初始化'
+    command -v runuser >/dev/null 2>&1 || die '找不到 runuser，无法以 tallynote 用户初始化'
+    local -a environment=(
+      "NODE_ENV=production"
+      "TALLYNOTE_DATA_DIR=${TALLYNOTE_DATA_DIR:-/var/lib/tallynote}"
+      "TALLYNOTE_INSTALL_PREFIX=${TALLYNOTE_INSTALL_PREFIX:-$PREFIX}"
+      "TALLYNOTE_TRUST_PROXY=${TALLYNOTE_TRUST_PROXY:-false}"
+      "TALLYNOTE_UPDATE_STRATEGY=${TALLYNOTE_UPDATE_STRATEGY:-systemd}"
+      "TALLYNOTE_HOST=${TALLYNOTE_HOST:-127.0.0.1}"
+      "TALLYNOTE_PORT=${TALLYNOTE_PORT:-3000}"
+      "TALLYNOTE_PUBLIC_ORIGIN=${TALLYNOTE_PUBLIC_ORIGIN:-http://127.0.0.1:3000}"
+      "TALLYNOTE_COOKIE_SECURE=${TALLYNOTE_COOKIE_SECURE:-false}"
+      "TALLYNOTE_ALLOW_INSECURE_HTTP=${TALLYNOTE_ALLOW_INSECURE_HTTP:-false}"
+      "TALLYNOTE_TIMEZONE=${TALLYNOTE_TIMEZONE:-Asia/Shanghai}"
+      "TALLYNOTE_UPDATE_METADATA_URL=${TALLYNOTE_UPDATE_METADATA_URL:-https://git.awaioi.com/api/v1/repos/awaioi/TallyNote/releases/latest}"
+      "TALLYNOTE_UPDATE_ALLOWED_HOSTS=${TALLYNOTE_UPDATE_ALLOWED_HOSTS:-git.awaioi.com}"
+      "TALLYNOTE_UPDATE_REQUIRE_SIGNATURE=${TALLYNOTE_UPDATE_REQUIRE_SIGNATURE:-false}"
+      "TALLYNOTE_UPDATE_MAX_MB=${TALLYNOTE_UPDATE_MAX_MB:-512}"
+      "TALLYNOTE_UPDATE_CHECK_COOLDOWN_SECONDS=${TALLYNOTE_UPDATE_CHECK_COOLDOWN_SECONDS:-60}"
+      "TALLYNOTE_UPDATE_DOWNLOAD_COOLDOWN_SECONDS=${TALLYNOTE_UPDATE_DOWNLOAD_COOLDOWN_SECONDS:-15}"
+      "TALLYNOTE_UPDATE_APPLY_COOLDOWN_SECONDS=${TALLYNOTE_UPDATE_APPLY_COOLDOWN_SECONDS:-15}"
+      "TALLYNOTE_MAX_FILE_MB=${TALLYNOTE_MAX_FILE_MB:-20}"
+      "TALLYNOTE_MAX_FILES_PER_REQUEST=${TALLYNOTE_MAX_FILES_PER_REQUEST:-20}"
+      "TALLYNOTE_MAX_RECORD_MB=${TALLYNOTE_MAX_RECORD_MB:-100}"
+      "TALLYNOTE_MAX_TOTAL_MB=${TALLYNOTE_MAX_TOTAL_MB:-2048}"
+      "TALLYNOTE_MAX_CONCURRENT_EXPORTS=${TALLYNOTE_MAX_CONCURRENT_EXPORTS:-2}"
+      "TALLYNOTE_MAX_EXPORT_RECORDS=${TALLYNOTE_MAX_EXPORT_RECORDS:-5000}"
+      "TALLYNOTE_MAX_EXPORT_MB=${TALLYNOTE_MAX_EXPORT_MB:-1024}"
+      "TALLYNOTE_MAX_EXPORT_STORAGE_MB=${TALLYNOTE_MAX_EXPORT_STORAGE_MB:-2048}"
+      "TALLYNOTE_SESSION_IDLE_HOURS=${TALLYNOTE_SESSION_IDLE_HOURS:-24}"
+      "TALLYNOTE_SESSION_ABSOLUTE_HOURS=${TALLYNOTE_SESSION_ABSOLUTE_HOURS:-168}"
+      "TALLYNOTE_EXPORT_TTL_MINUTES=${TALLYNOTE_EXPORT_TTL_MINUTES:-15}"
+    )
+    [[ -n "${TALLYNOTE_UPDATE_PUBLIC_KEY:-}" ]] && environment+=("TALLYNOTE_UPDATE_PUBLIC_KEY=$TALLYNOTE_UPDATE_PUBLIC_KEY")
+    if [[ -n "${TALLYNOTE_UPDATE_PUBLIC_KEY_FILE:-}" ]]; then
+      environment+=("TALLYNOTE_UPDATE_PUBLIC_KEY_FILE=$TALLYNOTE_UPDATE_PUBLIC_KEY_FILE")
+    fi
+    if [[ -n "${TALLYNOTE_UPDATE_HELPER_PATH:-}" ]]; then
+      environment+=("TALLYNOTE_UPDATE_HELPER_PATH=$TALLYNOTE_UPDATE_HELPER_PATH")
+    fi
+    runuser -u tallynote -- env -i "${environment[@]}" PATH="$PATH" "$node" "$cli" "${@:4}"
+  else
+    "$node" "$cli" "${@:4}"
+  fi
+}
+
+main() {
+  load_environment_file
+  local root node cli systemctl service_was_active=0 result check_only=0
+  for argument in "$@"; do
+    [[ "$argument" == "--check" ]] && check_only=1
+  done
+  root=$(resolve_release_root)
+  node="$root/runtime/bin/node"
+  [[ -x "$node" ]] || node=$(command -v node || true)
+  [[ -n "$node" && -x "$node" ]] || die '找不到 Node.js runtime'
+  cli="$root/dist/server/cli/admin-init.js"
+  [[ -f "$cli" && ! -L "$cli" ]] || die '管理员初始化程序不存在'
+
+  # Validate the privilege boundary before stopping an active service. A
+  # damaged installation must fail closed without causing avoidable downtime.
+  if [[ "${EUID:-$(id -u)}" == 0 ]]; then
+    local service_uid
+    service_uid=$(id -u tallynote 2>/dev/null) || die '找不到 tallynote 服务用户，拒绝以 root 身份执行管理员初始化'
+    [[ "$service_uid" =~ ^[1-9][0-9]*$ ]] || die 'tallynote 服务用户 UID 无效，拒绝以 root 身份执行管理员初始化'
+    command -v runuser >/dev/null 2>&1 || die '找不到 runuser，无法以 tallynote 用户初始化'
+  fi
+
+  # admin-init uses the same instance lock as the web process. Pause an active
+  # service for the duration, then restore exactly its previous active state.
+  systemctl=$(command -v systemctl || true)
+  if (( ! check_only )) && [[ "${EUID:-$(id -u)}" == 0 && -n "$systemctl" && -x "$systemctl" ]] && "$systemctl" is-active --quiet "$SERVICE_NAME"; then
+    service_was_active=1
+    printf 'tallynote admin-init: 暂停服务以完成管理员初始化\n' >&2
+    "$systemctl" stop "$SERVICE_NAME" || die '无法暂停 TallyNote 服务'
+  fi
+  restore_service() {
+    local exit_code=$?
+    if (( service_was_active )); then
+      printf 'tallynote admin-init: 恢复 TallyNote 服务\n' >&2
+      "$systemctl" start "$SERVICE_NAME" || printf 'tallynote admin-init: 警告：服务恢复失败，请执行 systemctl start %s\n' "$SERVICE_NAME" >&2
+    fi
+    return "$exit_code"
+  }
+  trap restore_service EXIT
+
+  cd -- "$root"
+  set +e
+  run_as_service_user "$root" "$node" "$cli" "$@"
+  result=$?
+  set -e
+  exit "$result"
+}
+
+main "$@"

docs/release.md

@@ -74,7 +74,7 @@ tallynote installer: 访问地址：http://127.0.0.1:<端口>
 
 已有安装默认拒绝安装不高于当前版本的 release；只有在明确执行 `--allow-downgrade`（或设置 `TALLYNOTE_ALLOW_DOWNGRADE=true`）时才允许回退版本。
 
-安装器拒绝预先存在的符号链接、非 root 拥有或对组/其他用户可写的安装、配置和备份目录。发布包同时携带 `uninstall.sh`，安装后会落到 `/usr/local/sbin/tallynote-uninstall`。`--allow-unsigned` 作为旧版本兼容参数保留。
+安装器拒绝预先存在的符号链接、非 root 拥有或对组/其他用户可写的安装、配置和备份目录。发布包同时携带 `uninstall.sh`，安装后会落到 `/usr/local/sbin/tallynote-uninstall`，并提供 `/usr/local/sbin/tallynote-admin-init` 作为生产环境首次管理员初始化入口。`--allow-unsigned` 作为旧版本兼容参数保留。
 
 安装布局：
 

install.sh

@@ -57,6 +57,7 @@ INSTALL_PREVIOUS_TARGET=''
 INSTALL_NEW_RELEASE=''
 INSTALL_WORK_DIR=''
 INSTALL_BACKUP_DIR=''
+INSTALL_BACKUP_COMPLETE=0
 INSTALL_WAS_ACTIVE=0
 INSTALL_PATH_WAS_ACTIVE=0
 INSTALL_UPDATE_WAS_ACTIVE=0
@@ -64,6 +65,8 @@ INSTALL_WAS_ENABLED=0
 INSTALL_PATH_WAS_ENABLED=0
 INSTALL_UPDATE_WAS_ENABLED=0
 INSTALL_SYSTEMD_TOUCHED=0
+ADMIN_INIT_PATH=/usr/local/sbin/tallynote-admin-init
+INSTALL_FIRST_INSTALL=0
 DATA_DIR_TEMP_ROOT=0
 DATA_DIR_ORIGINAL_OWNER=''
 
@@ -222,6 +225,55 @@ check_requested_port() {
   esac
 }
 
+run_initial_admin_wizard() {
+  if (( ! INSTALL_FIRST_INSTALL )); then
+    return 0
+  fi
+  if (( NON_INTERACTIVE )); then
+    log '非交互模式：跳过管理员初始化；稍后可执行 sudo tallynote-admin-init'
+    return 0
+  fi
+  [[ -r "$PROMPT_INPUT" && -w "$PROMPT_OUTPUT" ]] || {
+    log '未检测到交互式终端：跳过管理员初始化；稍后可执行 sudo tallynote-admin-init'
+    return 0
+  }
+  [[ -x "$ADMIN_INIT_PATH" ]] || die '管理员初始化命令未安装'
+
+  local status choice
+  if ! status=$("$ADMIN_INIT_PATH" --check 2>/dev/null); then
+    log '无法检查管理员初始化状态；基础安装已完成，稍后可执行 sudo tallynote-admin-init'
+    return 0
+  fi
+  [[ "$status" == empty ]] || return 0
+
+  exec 9<"$PROMPT_INPUT" || die '无法打开终端输入；请稍后执行 sudo tallynote-admin-init'
+  {
+    printf '\n首次安装还差一步：请创建管理员账号。\n'
+    printf '管理员账号用于登录 TallyNote，首次登录后需要设置正式密码。\n'
+  } > "$PROMPT_OUTPUT"
+  while :; do
+    prompt_value '现在创建管理员？输入 yes 继续，其他内容稍后创建' 'yes'
+    choice=$PROMPT_REPLY
+    case "$choice" in
+      yes|YES|Yes|y|Y) break ;;
+      no|NO|No|n|N|'')
+        exec 9<&-
+        log '已跳过管理员初始化；稍后可执行 sudo tallynote-admin-init'
+        return 0
+        ;;
+      *) printf '请输入 yes 或 no。\n' > "$PROMPT_OUTPUT" ;;
+    esac
+  done
+  stage '创建首位管理员（密码不会写入安装日志）'
+  if ! "$ADMIN_INIT_PATH" <&9 > "$PROMPT_OUTPUT"; then
+    exec 9<&-
+    log '管理员初始化未完成；基础安装已完成，稍后可执行 sudo tallynote-admin-init'
+    return 0
+  fi
+  exec 9<&-
+  stage_done '首位管理员创建完成'
+}
+
 wait_for_service_health() {
   local host=$1 port=$2 health_host health_url attempt
   health_host=$host
@@ -847,13 +899,16 @@ rollback_install_if_needed() {
     chmod 700 "$DATA_DIR" 2>/dev/null || true
     DATA_DIR_TEMP_ROOT=0
   fi
-  if (( INSTALL_COMMITTED == 0 )) && [[ -n "$INSTALL_BACKUP_DIR" && -d "$INSTALL_BACKUP_DIR" ]]; then
+  if (( INSTALL_COMMITTED == 0 && INSTALL_BACKUP_COMPLETE == 1 )) && [[ -n "$INSTALL_BACKUP_DIR" && -d "$INSTALL_BACKUP_DIR" ]]; then
     local backup_name target
-    for backup_name in tallynote.service tallynote-update.service tallynote-update.path tallynote-uninstall tallynote.env update-signing-key.pub; do
+    for backup_name in tallynote.service tallynote-update.service tallynote-update.path tallynote-update tallynote-update-runner tallynote-uninstall tallynote-admin-init tallynote.env update-signing-key.pub; do
       case "$backup_name" in
         tallynote.env) target="$CONFIG_DIR/tallynote.env" ;;
         update-signing-key.pub) target="$CONFIG_DIR/update-signing-key.pub" ;;
         tallynote-uninstall) target="/usr/local/sbin/tallynote-uninstall" ;;
+        tallynote-admin-init) target="$ADMIN_INIT_PATH" ;;
+        tallynote-update) target="/usr/local/sbin/tallynote-update" ;;
+        tallynote-update-runner) target="/usr/local/libexec/tallynote-update-runner" ;;
         *) target="/etc/systemd/system/$backup_name" ;;
       esac
       [[ ! -L "$target" ]] || continue
@@ -880,28 +935,41 @@ backup_install_files() {
   local directory=$1 target name
   mkdir -p "$directory"
   chmod 700 "$directory"
-  for name in tallynote.service tallynote-update.service tallynote-update.path; do
-    target="/etc/systemd/system/$name"
-    [[ ! -L "$target" ]] || die "现有 systemd 单元不能是符号链接：$target"
+  # Validate every target before copying any of them. If validation fails, the
+  # installer has not changed an existing file and rollback must not infer that
+  # a partial backup is safe to restore from.
+  for name in tallynote.service tallynote-update.service tallynote-update.path tallynote-update tallynote-update-runner tallynote-uninstall tallynote-admin-init tallynote.env update-signing-key.pub; do
+    case "$name" in
+      tallynote.env) target="$CONFIG_DIR/$name" ;;
+      update-signing-key.pub) target="$CONFIG_DIR/$name" ;;
+      tallynote-uninstall) target="/usr/local/sbin/$name" ;;
+      tallynote-admin-init) target="$ADMIN_INIT_PATH" ;;
+      tallynote-update) target="/usr/local/sbin/$name" ;;
+      tallynote-update-runner) target="/usr/local/libexec/$name" ;;
+      *) target="/etc/systemd/system/$name" ;;
+    esac
+    [[ ! -L "$target" ]] || die "现有安装文件不能是符号链接：$target"
     if [[ -e "$target" ]]; then
-      [[ -f "$target" ]] || die "现有 systemd 单元不是普通文件：$target"
-      cp -a -- "$target" "$directory/$name"
+      [[ -f "$target" ]] || die "现有安装文件不是普通文件：$target"
     fi
   done
-  for name in tallynote.env update-signing-key.pub; do
-    target="$CONFIG_DIR/$name"
-    [[ ! -L "$target" ]] || die "现有配置不能是符号链接：$target"
+
+  for name in tallynote.service tallynote-update.service tallynote-update.path tallynote-update tallynote-update-runner tallynote-uninstall tallynote-admin-init tallynote.env update-signing-key.pub; do
+    case "$name" in
+      tallynote.env) target="$CONFIG_DIR/$name" ;;
+      update-signing-key.pub) target="$CONFIG_DIR/$name" ;;
+      tallynote-uninstall) target="/usr/local/sbin/$name" ;;
+      tallynote-admin-init) target="$ADMIN_INIT_PATH" ;;
+      tallynote-update) target="/usr/local/sbin/$name" ;;
+      tallynote-update-runner) target="/usr/local/libexec/$name" ;;
+      *) target="/etc/systemd/system/$name" ;;
+    esac
     if [[ -e "$target" ]]; then
-      [[ -f "$target" ]] || die "现有配置不是普通文件：$target"
-      cp -a -- "$target" "$directory/$name"
+      cp -a -- "$target" "$directory/$name" || die "无法备份现有安装文件：$target"
+      [[ -f "$directory/$name" ]] || die "现有安装文件备份不完整：$target"
     fi
   done
-  target="/usr/local/sbin/tallynote-uninstall"
-  [[ ! -L "$target" ]] || die "现有卸载器不能是符号链接：$target"
-  if [[ -e "$target" ]]; then
-    [[ -f "$target" ]] || die "现有卸载器不是普通文件：$target"
-    cp -a -- "$target" "$directory/tallynote-uninstall"
-  fi
+  INSTALL_BACKUP_COMPLETE=1
 }
 
 read_env_value() {
@@ -1091,9 +1159,9 @@ install_release() {
   normalize_release_tree "$tmp/unpacked"
   [[ -d "$tmp/unpacked/dist" ]] || die 'release archive must contain dist/ at its root'
   [[ -x "$tmp/unpacked/bin/tallynote" ]] || die 'release archive must contain executable bin/tallynote'
-  [[ -f "$tmp/unpacked/package.json" && -f "$tmp/unpacked/dist/server/index.js" && -f "$tmp/unpacked/dist/web/index.html" ]] || die 'release archive is incomplete'
+  [[ -f "$tmp/unpacked/package.json" && -f "$tmp/unpacked/dist/server/index.js" && -f "$tmp/unpacked/dist/server/cli/admin-init.js" && -f "$tmp/unpacked/dist/web/index.html" ]] || die 'release archive is incomplete'
   [[ -f "$tmp/unpacked/systemd/tallynote.service" && -f "$tmp/unpacked/systemd/tallynote-update.service" && -f "$tmp/unpacked/systemd/tallynote-update.path" ]] || die 'release archive is missing systemd units'
-  [[ -f "$tmp/unpacked/systemd/tallynote.env.example" && -x "$tmp/unpacked/scripts/tallynote-update.sh" && -x "$tmp/unpacked/scripts/tallynote-update-runner.sh" && -x "$tmp/unpacked/uninstall.sh" ]] || die 'release archive is missing update/uninstall support files'
+  [[ -f "$tmp/unpacked/systemd/tallynote.env.example" && -x "$tmp/unpacked/scripts/tallynote-update.sh" && -x "$tmp/unpacked/scripts/tallynote-update-runner.sh" && -x "$tmp/unpacked/uninstall.sh" && -x "$tmp/unpacked/bin/tallynote-admin-init" ]] || die 'release archive is missing update/uninstall/admin-init support files'
   grep -Eq '"version"[[:space:]]*:[[:space:]]*"'"$version"'"([,}]|[[:space:]])' "$tmp/unpacked/package.json" || die 'release package version does not match requested version'
   ensure_root_directory "$PREFIX" 755
   ensure_root_directory "$PREFIX/releases" 755
@@ -1288,6 +1356,11 @@ main() {
   stage_done '发布包校验通过'
   [[ "$PREFIX" = /* && "$DATA_DIR" = /* && "$CONFIG_DIR" = /* ]] || die '安装、数据和配置目录必须是绝对路径'
   [[ ! -L "$DATA_DIR" && ! -L "$PREFIX" && ! -L "$CONFIG_DIR" ]] || die 'installation/data/config paths must not be symlinks'
+  if [[ -L "$PREFIX/current" || -e "$PREFIX/current" ]]; then
+    INSTALL_FIRST_INSTALL=0
+  else
+    INSTALL_FIRST_INSTALL=1
+  fi
   stage '停止旧服务并准备安装、配置和数据目录'
   id tallynote >/dev/null 2>&1 || useradd --system --user-group --home-dir "$DATA_DIR" --shell /usr/sbin/nologin tallynote
   backup_install_files "$INSTALL_BACKUP_DIR"
@@ -1315,17 +1388,19 @@ main() {
   stage_done "版本 ${VERSION#v} 已切换为当前版本"
   release_dir="$PREFIX/releases/$VERSION"
   [[ -f "$release_dir/systemd/tallynote.service" && -f "$release_dir/systemd/tallynote-update.service" && -f "$release_dir/systemd/tallynote-update.path" ]] || die 'release package is missing systemd unit files'
-  [[ -f "$release_dir/systemd/tallynote.env.example" && -f "$release_dir/scripts/tallynote-update-runner.sh" && -x "$release_dir/uninstall.sh" ]] || die 'release package is missing update/uninstall support files'
+  [[ -f "$release_dir/systemd/tallynote.env.example" && -f "$release_dir/scripts/tallynote-update-runner.sh" && -x "$release_dir/uninstall.sh" && -x "$release_dir/bin/tallynote-admin-init" && -f "$release_dir/dist/server/cli/admin-init.js" ]] || die 'release package is missing update/uninstall/admin-init support files'
   stage '安装 systemd 单元、更新辅助程序和卸载器'
-  install -d -m 755 /usr/local/libexec /etc/systemd/system
+  install -d -m 755 /usr/local/sbin /usr/local/libexec /etc/systemd/system
   local unit_tmp
   unit_tmp=$(mktemp -d)
   sed "s#/opt/tallynote#$PREFIX#g; s#/var/lib/tallynote#$DATA_DIR#g" "$release_dir/systemd/tallynote.service" > "$unit_tmp/tallynote.service"
   sed "s#/opt/tallynote#$PREFIX#g; s#/var/lib/tallynote#$DATA_DIR#g; s#/var/lib/tallynote-backups#$(dirname -- "$DATA_DIR")/tallynote-backups#g" "$release_dir/systemd/tallynote-update.service" > "$unit_tmp/tallynote-update.service"
   sed "s#/var/lib/tallynote#$DATA_DIR#g" "$release_dir/systemd/tallynote-update.path" > "$unit_tmp/tallynote-update.path"
+  sed "s#/opt/tallynote#$PREFIX#g; s#/etc/tallynote#$CONFIG_DIR#g" "$release_dir/bin/tallynote-admin-init" > "$unit_tmp/tallynote-admin-init"
   install -o root -g root -m 644 "$unit_tmp/tallynote.service" /etc/systemd/system/tallynote.service
   install -o root -g root -m 644 "$unit_tmp/tallynote-update.service" /etc/systemd/system/tallynote-update.service
   install -o root -g root -m 644 "$unit_tmp/tallynote-update.path" /etc/systemd/system/tallynote-update.path
+  install -o root -g root -m 755 "$unit_tmp/tallynote-admin-init" "$ADMIN_INIT_PATH"
   rm -rf "$unit_tmp"
   install -o root -g root -m 755 "$release_dir/scripts/tallynote-update.sh" /usr/local/sbin/tallynote-update
   install -o root -g root -m 755 "$release_dir/scripts/tallynote-update-runner.sh" /usr/local/libexec/tallynote-update-runner
@@ -1407,10 +1482,10 @@ main() {
       printf 'TALLYNOTE_UPDATE_PUBLIC_KEY_FILE=%s\n' "$CONFIG_DIR/update-signing-key.pub" >> "$CONFIG_DIR/tallynote.env"
     fi
   fi
-  stage_done 'systemd 单元、更新辅助程序和卸载器已安装'
-  stage '重新加载 systemd 并启动 TallyNote'
   chown root:root "$CONFIG_DIR/tallynote.env"
   chmod 640 "$CONFIG_DIR/tallynote.env"
+  stage_done 'systemd 单元、更新辅助程序和卸载器已安装'
+  stage '重新加载 systemd 并启动 TallyNote'
   systemctl daemon-reload
   INSTALL_SYSTEMD_TOUCHED=1
   systemctl enable --now tallynote.service tallynote-update.path
@@ -1443,6 +1518,7 @@ main() {
   rm -rf -- "$INSTALL_WORK_DIR" 2>/dev/null || true
   INSTALL_WORK_DIR=''
   stage_done "安装完成：TallyNote ${VERSION#v}"
+  run_initial_admin_wizard
   local access_url access_host access_port configured_host configured_port
   access_url=$(read_env_value "$CONFIG_DIR/tallynote.env" TALLYNOTE_PUBLIC_ORIGIN 2>/dev/null || true)
   if [[ -z "$access_url" ]]; then

package.json

@@ -1,6 +1,6 @@
 {
   "name": "tallynote",
-  "version": "1.1.11",
+  "version": "1.1.13",
   "private": true,
   "type": "module",
   "packageManager": "pnpm@9.0.6",

scripts/build-release.sh

@@ -36,7 +36,7 @@ cp uninstall.sh "$stage/uninstall.sh"
 cp -a systemd/tallynote.service systemd/tallynote-update.service systemd/tallynote-update.path systemd/tallynote.env.example "$stage/systemd/"
 node_path=$(command -v node)
 cp -L "$node_path" "$stage/runtime/bin/node"
-chmod 755 "$stage/bin/tallynote" "$stage/scripts"/*.sh "$stage/runtime/bin/node" "$stage/uninstall.sh"
+chmod 755 "$stage/bin/tallynote" "$stage/bin/tallynote-admin-init" "$stage/scripts"/*.sh "$stage/runtime/bin/node" "$stage/uninstall.sh"
 
 # pnpm's default linker creates symlinks. A release archive is deliberately
 # symlink-free so the installer can reject traversal links deterministically.

scripts/test-installer.sh

@@ -156,12 +156,14 @@ bash -c '
 # A RETURN trap installed by install_release must be cleared while its local
 # temporary variables still exist; otherwise set -u fails at the end of main.
 release_fixture="$tmp/release-fixture"
-mkdir -p "$release_fixture/dist/server" "$release_fixture/dist/web" "$release_fixture/bin" \
+mkdir -p "$release_fixture/dist/server/cli" "$release_fixture/dist/web" "$release_fixture/bin" \
   "$release_fixture/scripts" "$release_fixture/runtime/bin" "$release_fixture/systemd"
 printf '%s\n' '{"version":"1.0.0"}' > "$release_fixture/package.json"
 printf '%s\n' server > "$release_fixture/dist/server/index.js"
+printf '%s\n' cli > "$release_fixture/dist/server/cli/admin-init.js"
 printf '%s\n' web > "$release_fixture/dist/web/index.html"
 printf '%s\n' '#!/bin/sh' > "$release_fixture/bin/tallynote"
+cp "$root/bin/tallynote-admin-init" "$release_fixture/bin/tallynote-admin-init"
 printf '%s\n' '#!/bin/sh' > "$release_fixture/scripts/tallynote-update.sh"
 printf '%s\n' '#!/bin/sh' > "$release_fixture/scripts/tallynote-update-runner.sh"
 printf '%s\n' '#!/bin/sh' > "$release_fixture/uninstall.sh"
@@ -169,7 +171,7 @@ printf '%s\n' '[Unit]' > "$release_fixture/systemd/tallynote.service"
 printf '%s\n' '[Unit]' > "$release_fixture/systemd/tallynote-update.service"
 printf '%s\n' '[Unit]' > "$release_fixture/systemd/tallynote-update.path"
 printf '%s\n' 'TALLYNOTE_HOST=127.0.0.1' > "$release_fixture/systemd/tallynote.env.example"
-chmod 755 "$release_fixture/bin/tallynote" "$release_fixture/scripts"/*.sh "$release_fixture/uninstall.sh"
+chmod 755 "$release_fixture/bin/tallynote" "$release_fixture/bin/tallynote-admin-init" "$release_fixture/scripts"/*.sh "$release_fixture/uninstall.sh"
 release_archive="$tmp/release-fixture.tar.gz"
 tar -C "$release_fixture" -czf "$release_archive" .
 bash -c '
@@ -185,10 +187,105 @@ bash -c '
     if [[ "${1:-}" == -Tf ]]; then shift; /bin/mv -f "$@"; else /bin/mv "$@"; fi
   }
   install_release "$archive" 1.0.0
+  [[ -x "$PREFIX/releases/1.0.0/bin/tallynote-admin-init" ]]
   set_env_key() { local key=$1 value=$2 escaped; :; }
   set_env_key test value
 ' _ "$installer_lib" "$release_archive" "$tmp/install-release"
 
+# The production admin wrapper must load a release-relative runtime, change to
+# the release root, and forward CLI arguments without requiring pnpm.
+wrapper_prefix="$tmp/wrapper-prefix"
+mkdir -p "$wrapper_prefix/releases/1.0.0/runtime/bin" "$wrapper_prefix/releases/1.0.0/dist/server/cli"
+ln -s "$wrapper_prefix/releases/1.0.0" "$wrapper_prefix/current"
+printf '%s\n' '#!/usr/bin/env bash' 'pwd -P > "$TALLYNOTE_WRAPPER_LOG"' 'printf "%s\n" "$@" >> "$TALLYNOTE_WRAPPER_LOG"' > "$wrapper_prefix/releases/1.0.0/runtime/bin/node"
+chmod 755 "$wrapper_prefix/releases/1.0.0/runtime/bin/node"
+printf '%s\n' cli > "$wrapper_prefix/releases/1.0.0/dist/server/cli/admin-init.js"
+TALLYNOTE_INSTALL_PREFIX="$wrapper_prefix" TALLYNOTE_CONFIG_DIR="$tmp/no-config" TALLYNOTE_WRAPPER_LOG="$tmp/wrapper.log" \
+  bash "$root/bin/tallynote-admin-init" --generate
+wrapper_expected_root=$(cd "$wrapper_prefix/releases/1.0.0" && pwd -P)
+grep -Fxq "$wrapper_expected_root" "$tmp/wrapper.log"
+grep -Fxq -- '--generate' "$tmp/wrapper.log"
+
+# The first-install prompt is optional and must support an explicit later
+# initialization path without blocking the rest of the install.
+admin_wizard_dir="$tmp/admin-wizard"
+mkdir -p "$admin_wizard_dir"
+printf '%s\n' yes remaining-input > "$admin_wizard_dir/input"
+: > "$admin_wizard_dir/output"
+cat > "$admin_wizard_dir/admin-init" <<'EOF'
+#!/usr/bin/env bash
+if [[ "${1:-}" == --check ]]; then
+  printf '%s\n' empty
+else
+  printf '%s\n' initialized > "$TALLYNOTE_ADMIN_WIZARD_RESULT"
+fi
+EOF
+chmod 755 "$admin_wizard_dir/admin-init"
+bash -c '
+  script=$1
+  dir=$2
+  set --
+  source "$script"
+  INSTALL_FIRST_INSTALL=1
+  NON_INTERACTIVE=0
+  PROMPT_INPUT="$dir/input"
+  PROMPT_OUTPUT="$dir/output"
+  ADMIN_INIT_PATH="$dir/admin-init"
+  TALLYNOTE_ADMIN_WIZARD_RESULT="$dir/result"
+  export TALLYNOTE_ADMIN_WIZARD_RESULT
+  run_initial_admin_wizard
+  [[ -f "$dir/result" ]]
+' _ "$installer_lib" "$admin_wizard_dir"
+
+# An upgrade must never reopen the first-admin wizard, even if a damaged or
+# deliberately empty database would otherwise report an uninitialized state.
+printf '%s\n' yes > "$admin_wizard_dir/upgrade-input"
+rm -f "$admin_wizard_dir/upgrade-result"
+bash -c '
+  script=$1
+  dir=$2
+  set --
+  source "$script"
+  INSTALL_FIRST_INSTALL=0
+  NON_INTERACTIVE=0
+  PROMPT_INPUT="$dir/upgrade-input"
+  PROMPT_OUTPUT="$dir/upgrade-output"
+  ADMIN_INIT_PATH="$dir/admin-init"
+  TALLYNOTE_ADMIN_WIZARD_RESULT="$dir/upgrade-result"
+  export TALLYNOTE_ADMIN_WIZARD_RESULT
+  run_initial_admin_wizard
+  [[ ! -e "$dir/upgrade-result" ]]
+' _ "$installer_lib" "$admin_wizard_dir"
+
+# Validation or password errors after the base service is committed must leave
+# the installation usable and point the operator at the standalone command.
+failed_wizard_dir="$tmp/failed-admin-wizard"
+mkdir -p "$failed_wizard_dir"
+printf '%s\n' yes > "$failed_wizard_dir/input"
+: > "$failed_wizard_dir/output"
+cat >"$failed_wizard_dir/admin-init" <<'EOF'
+#!/usr/bin/env bash
+if [[ "${1:-}" == --check ]]; then
+  printf '%s\n' empty
+  exit 0
+fi
+exit 1
+EOF
+chmod 755 "$failed_wizard_dir/admin-init"
+bash -c '
+  script=$1
+  dir=$2
+  set --
+  source "$script"
+  INSTALL_FIRST_INSTALL=1
+  NON_INTERACTIVE=0
+  PROMPT_INPUT="$dir/input"
+  PROMPT_OUTPUT="$dir/output"
+  ADMIN_INIT_PATH="$dir/admin-init"
+  run_initial_admin_wizard
+  [[ -x "$dir/admin-init" ]]
+' _ "$installer_lib" "$failed_wizard_dir"
+
 # Duplicate security-sensitive EnvironmentFile assignments are rejected even
 # when the first value looks valid (systemd uses the later value).
 duplicate_env="$tmp/duplicate.env"

scripts/test-uninstaller.sh

@@ -34,8 +34,9 @@ make_fixture() {
   done
   printf '%s\n' '#!/usr/bin/env bash' 'PREFIX=${TALLYNOTE_INSTALL_PREFIX:-/opt/tallynote}' 'echo TallyNote' > "$fixture/usr/local/sbin/tallynote-update"
   printf '%s\n' '#!/usr/bin/env bash' 'PREFIX=${TALLYNOTE_INSTALL_PREFIX:-/opt/tallynote}' 'echo TallyNote' > "$fixture/usr/local/libexec/tallynote-update-runner"
+  printf '%s\n' '#!/usr/bin/env bash' 'exec /opt/tallynote/current/runtime/bin/node /opt/tallynote/current/dist/server/cli/admin-init.js' > "$fixture/usr/local/sbin/tallynote-admin-init"
   cp "$root/uninstall.sh" "$fixture/usr/local/sbin/tallynote-uninstall"
-  chmod 755 "$fixture/usr/local/sbin/tallynote-update" "$fixture/usr/local/libexec/tallynote-update-runner" "$fixture/usr/local/sbin/tallynote-uninstall"
+  chmod 755 "$fixture/usr/local/sbin/tallynote-update" "$fixture/usr/local/libexec/tallynote-update-runner" "$fixture/usr/local/sbin/tallynote-admin-init" "$fixture/usr/local/sbin/tallynote-uninstall"
   printf '%s\n' 'sqlite' > "$fixture/var/lib/tallynote/tallynote.db"
   printf '%s\n' 'backup' > "$fixture/var/lib/tallynote-backups/backup.db"
 }
@@ -73,6 +74,7 @@ run_uninstall "$fixture"
 [[ ! -e "$fixture/opt/tallynote" || -z "$(find "$fixture/opt/tallynote" -mindepth 1 -print -quit 2>/dev/null)" ]]
 [[ ! -e "$fixture/etc/systemd/system/tallynote.service" ]]
 [[ ! -e "$fixture/usr/local/sbin/tallynote-update" ]]
+[[ ! -e "$fixture/usr/local/sbin/tallynote-admin-init" ]]
 grep -n '^is-active.*tallynote-update.path' "$fixture/systemctl.log" >/dev/null
 grep -n '^stop tallynote-update.path' "$fixture/systemctl.log" >/dev/null
 path_stop=$(grep -n '^stop tallynote-update.path' "$fixture/systemctl.log" | head -n1 | cut -d: -f1)

server/cli/admin-init.ts

@@ -1,7 +1,7 @@
 import { stdin as input, stdout as output } from "node:process";
-import { mkdirSync } from "node:fs";
 import { randomUUID } from "node:crypto";
-import { openDatabase } from "../db/index.js";
+import { StringDecoder } from "node:string_decoder";
+import { openDatabase, openDatabaseReadOnly } from "../db/index.js";
 import { acquireInstanceLock, loadConfig, prepareDataDirectories } from "../config.js";
 import { hashPassword, normalizeUsername, validateNewPassword, temporaryPassword } from "../security.js";
 import { writeAudit } from "../audit.js";
@@ -11,42 +11,120 @@ function arg(name: string): string | undefined {
   return index >= 0 ? process.argv[index + 1] : undefined;
 }
 
+// A terminal paste can contain more than one line. Keep the unread tail for
+// the next prompt instead of silently discarding credentials after the first
+// newline.
+let pendingInput = "";
+let pendingSkipLf = false;
+
 async function readSecret(prompt: string): Promise<string> {
   if (!input.isTTY) throw new Error("admin:init 需要交互式 TTY，不能通过管道传入密码");
   output.write(prompt);
   return await new Promise<string>((resolve, reject) => {
     let value = "";
+    let escapeSequence = false;
+    let cleaned = false;
+    const decoder = new StringDecoder("utf8");
     const wasRaw = Boolean(input.isRaw);
-    const onData = (chunk: Buffer) => {
-      const text = chunk.toString("utf8");
-      if (text === "\u0003") {
-        cleanup();
-        reject(new Error("已取消"));
-      } else if (text === "\r" || text === "\n") {
-        cleanup();
-        output.write("\n");
-        resolve(value);
-      } else if (text === "\u007f") {
-        value = value.slice(0, -1);
-      } else if (!text.includes("\u001b")) {
-        value += text;
-      }
-    };
+    const initialInput = pendingInput;
+    pendingInput = "";
+    let onData: (chunk: Buffer | string) => void;
+    let onSignal: () => void;
     const cleanup = () => {
+      if (cleaned) return;
+      cleaned = true;
       input.off("data", onData);
+      input.off("error", onInputError);
+      process.off("SIGINT", onSignal);
+      process.off("SIGTERM", onSignal);
       input.setRawMode?.(wasRaw);
       input.pause();
     };
+    const finish = (error?: Error) => {
+      cleanup();
+      if (error) reject(error);
+      else {
+        output.write("\n");
+        resolve(value);
+      }
+    };
+    const onInputError = (error: Error) => finish(error);
+    onSignal = () => finish(new Error("已取消"));
+    const consume = (text: string) => {
+      let offset = 0;
+      for (const character of text) {
+        offset += character.length;
+        if (pendingSkipLf) {
+          if (character === "\n") {
+            pendingSkipLf = false;
+            continue;
+          }
+          pendingSkipLf = false;
+        }
+        if (character === "\u0003") {
+          finish(new Error("已取消"));
+          return;
+        }
+        if (escapeSequence) {
+          if (/[A-Za-z~]/.test(character)) escapeSequence = false;
+          continue;
+        }
+        if (character === "\u001b") {
+          escapeSequence = true;
+        } else if (character === "\r" || character === "\n") {
+          const tail = text.slice(offset);
+          pendingInput = tail.startsWith("\n") && character === "\r" ? tail.slice(1) : tail;
+          pendingSkipLf = character === "\r" && !tail.startsWith("\n");
+          finish();
+          return;
+        } else if (character === "\u007f" || character === "\b") {
+          value = value.slice(0, -1);
+        } else {
+          value += character;
+        }
+      }
+    };
+    onData = (chunk) => {
+      consume(typeof chunk === "string" ? chunk : decoder.write(chunk));
+    };
     input.resume();
     input.setRawMode?.(true);
+    process.once("SIGINT", onSignal);
+    process.once("SIGTERM", onSignal);
+    input.once("error", onInputError);
     input.on("data", onData);
+    if (initialInput) consume(initialInput);
   });
 }
 
 async function main() {
   const config = loadConfig();
+  const checkOnly = process.argv.includes("--check");
+  if (checkOnly) {
+    let database;
+    try {
+      database = openDatabaseReadOnly(config);
+    } catch (error) {
+      if (error && typeof error === "object" && "code" in error && (error as NodeJS.ErrnoException).code === "ENOENT") {
+        console.log("empty");
+        return;
+      }
+      throw error;
+    }
+    try {
+      const hasAdminsTable = database.sqlite
+        .prepare("SELECT 1 AS present FROM sqlite_master WHERE type = 'table' AND name = 'admins'")
+        .get();
+      const existing = hasAdminsTable
+        ? database.sqlite.prepare("SELECT COUNT(*) AS count FROM admins").get() as { count: number }
+        : { count: 0 };
+      console.log(existing.count > 0 ? "initialized" : "empty");
+    } finally {
+      database.sqlite.close();
+    }
+    return;
+  }
   prepareDataDirectories(config);
-  mkdirSync(config.dataDir, { recursive: true, mode: 0o700 });
   const release = acquireInstanceLock(config);
   const database = openDatabase(config);
   try {
@@ -64,6 +142,9 @@ async function main() {
     if (policyError) throw new Error(policyError);
     const normalized = normalizeUsername(username);
     if ([...normalized].length < 3) throw new Error("用户名至少需要 3 个字符");
+    if ([...normalized].length > 64) throw new Error("用户名最多 64 个字符");
+    const normalizedDisplayName = displayName.normalize("NFKC").trim();
+    if ([...normalizedDisplayName].length < 1 || [...normalizedDisplayName].length > 80) throw new Error("显示名称必须为 1-80 个字符");
     const passwordHash = await hashPassword(password);
     const id = randomUUID();
     const now = Date.now();
@@ -74,14 +155,14 @@ async function main() {
         INSERT INTO admins(id, username, username_norm, display_name, password_hash, status,
           must_change_password, auth_version, version, created_at)
         VALUES (?, ?, ?, ?, ?, 'active', 1, 1, 1, ?)
-      `).run(id, username.normalize("NFKC").trim(), normalized, displayName.trim(), passwordHash, now);
+      `).run(id, username.normalize("NFKC").trim(), normalized, normalizedDisplayName, passwordHash, now);
       writeAudit(database.sqlite, {
         requestId: `cli:${randomUUID()}`,
         actorUsername: "cli",
         action: "admin.initialized",
         targetType: "admin",
         targetId: id,
-        after: { username: normalized, displayName: displayName.trim(), status: "active" },
+        after: { username: normalized, displayName: normalizedDisplayName, status: "active" },
       });
     })();
     console.log(generate ? `已创建首位管理员。一次性密码：${password}` : "已创建首位管理员。");

server/db/index.ts

@@ -1,6 +1,6 @@
 import Database from "better-sqlite3";
 import { drizzle, type BetterSQLite3Database } from "drizzle-orm/better-sqlite3";
-import { readdirSync, readFileSync } from "node:fs";
+import { lstatSync, readdirSync, readFileSync } from "node:fs";
 import { chmodSync, existsSync } from "node:fs";
 import path from "node:path";
 import type { AppConfig } from "../config.js";
@@ -44,3 +44,24 @@ export function openDatabase(config: AppConfig): DatabaseContext {
   if (foreignKeys !== 1) throw new Error("SQLite 外键未启用");
   return { sqlite, db: drizzle(sqlite, { schema }) };
 }
+
+/**
+ * Open an existing database without creating directories, changing journal
+ * mode, running migrations, or changing file permissions. This is used by
+ * administrative status checks that must be side-effect free.
+ */
+export function openDatabaseReadOnly(config: AppConfig): DatabaseContext {
+  const info = lstatSync(config.dbPath);
+  if (!info.isFile() || info.isSymbolicLink()) throw new Error(`数据库文件不是安全的普通文件：${config.dbPath}`);
+  const sqlite = new Database(config.dbPath, { readonly: true, fileMustExist: true });
+  sqlite.pragma("foreign_keys = ON");
+  sqlite.pragma("busy_timeout = 5000");
+  sqlite.pragma("temp_store = MEMORY");
+  sqlite.pragma("query_only = ON");
+  const foreignKeys = sqlite.pragma("foreign_keys", { simple: true });
+  if (foreignKeys !== 1) {
+    sqlite.close();
+    throw new Error("SQLite 外键未启用");
+  }
+  return { sqlite, db: drizzle(sqlite, { schema }) };
+}

tests/admin-init.test.ts

@@ -0,0 +1,111 @@
+import { describe, expect, it } from "vitest";
+import { existsSync, mkdtempSync, readFileSync, rmSync } from "node:fs";
+import { spawnSync } from "node:child_process";
+import { tmpdir } from "node:os";
+import path from "node:path";
+import Database from "better-sqlite3";
+
+const root = path.resolve(process.cwd());
+const cli = path.join(root, "server", "cli", "admin-init.ts");
+const tsx = path.join(root, "node_modules", "tsx", "dist", "cli.mjs");
+
+function runAdmin(dataDir: string, args: string[]) {
+  return spawnSync(process.execPath, [tsx, cli, ...args], {
+    cwd: root,
+    env: {
+      ...process.env,
+      NODE_ENV: "test",
+      TALLYNOTE_DATA_DIR: dataDir,
+      TALLYNOTE_PUBLIC_ORIGIN: "http://127.0.0.1:3999",
+      TALLYNOTE_COOKIE_SECURE: "false",
+      TALLYNOTE_UPDATE_STRATEGY: "disabled",
+    },
+    encoding: "utf8",
+  });
+}
+
+describe("生产管理员初始化 CLI", () => {
+  it("--check 是只读的，空数据目录不会被创建", () => {
+    const parent = mkdtempSync(path.join(tmpdir(), "tallynote-admin-check-"));
+    const dataDir = path.join(parent, "data");
+    try {
+      const result = runAdmin(dataDir, ["--check"]);
+      expect(result.status).toBe(0);
+      expect(result.stdout.trim()).toBe("empty");
+      expect(existsSync(dataDir)).toBe(false);
+      expect(existsSync(path.join(dataDir, "tallynote.db"))).toBe(false);
+    } finally {
+      rmSync(parent, { recursive: true, force: true });
+    }
+  });
+
+  it("--check 不会执行迁移或创建 schema_migrations", () => {
+    const dataDir = mkdtempSync(path.join(tmpdir(), "tallynote-admin-check-"));
+    const database = new Database(path.join(dataDir, "tallynote.db"));
+    database.exec("CREATE TABLE admins (id TEXT PRIMARY KEY)");
+    database.close();
+    try {
+      const result = runAdmin(dataDir, ["--check"]);
+      expect(result.status).toBe(0);
+      expect(result.stdout.trim()).toBe("empty");
+      const verify = new Database(path.join(dataDir, "tallynote.db"), { readonly: true });
+      const schemaMigrations = verify
+        .prepare("SELECT name FROM sqlite_master WHERE type = 'table' AND name = 'schema_migrations'")
+        .get();
+      expect(schemaMigrations).toBeUndefined();
+      verify.close();
+    } finally {
+      rmSync(dataDir, { recursive: true, force: true });
+    }
+  });
+
+  it("只允许初始化首位管理员，并写入一次性密码和审计记录", () => {
+    const dataDir = mkdtempSync(path.join(tmpdir(), "tallynote-admin-init-"));
+    try {
+      const first = runAdmin(dataDir, ["--username", "admin", "--display-name", "管理员", "--generate"]);
+      expect(first.status).toBe(0);
+      expect(first.stdout).toMatch(/已创建首位管理员。一次性密码：\S+/);
+
+      const database = new Database(path.join(dataDir, "tallynote.db"));
+      const admin = database.prepare("SELECT username, display_name, must_change_password FROM admins").get() as { username: string; display_name: string; must_change_password: number };
+      const audit = database.prepare("SELECT action, actor_username FROM audit_events ORDER BY occurred_at DESC LIMIT 1").get() as { action: string; actor_username: string };
+      expect(admin).toEqual({ username: "admin", display_name: "管理员", must_change_password: 1 });
+      expect(audit).toEqual({ action: "admin.initialized", actor_username: "cli" });
+      database.close();
+
+      const check = runAdmin(dataDir, ["--check"]);
+      expect(check.status).toBe(0);
+      expect(check.stdout.trim()).toBe("initialized");
+
+      const second = runAdmin(dataDir, ["--username", "other", "--display-name", "其他", "--generate"]);
+      expect(second.status).not.toBe(0);
+      expect(`${second.stdout}${second.stderr}`).toContain("INITIAL_ADMIN_EXISTS");
+    } finally {
+      rmSync(dataDir, { recursive: true, force: true });
+    }
+  }, 15_000);
+
+  it("密码输入不是 TTY 时明确拒绝通过管道传入", () => {
+    const dataDir = mkdtempSync(path.join(tmpdir(), "tallynote-admin-init-"));
+    try {
+      const result = spawnSync(process.execPath, [tsx, cli], {
+        cwd: root,
+        input: "admin\n管理员\npassword-password\npassword-password\n",
+        env: {
+          ...process.env,
+          NODE_ENV: "test",
+          TALLYNOTE_DATA_DIR: dataDir,
+          TALLYNOTE_PUBLIC_ORIGIN: "http://127.0.0.1:3999",
+          TALLYNOTE_COOKIE_SECURE: "false",
+          TALLYNOTE_UPDATE_STRATEGY: "disabled",
+        },
+        encoding: "utf8",
+      });
+      expect(result.status).not.toBe(0);
+      expect(`${result.stdout}${result.stderr}`).toContain("交互式 TTY");
+      expect(readFileSync(path.join(dataDir, "tallynote.db"))).toBeTruthy();
+    } finally {
+      rmSync(dataDir, { recursive: true, force: true });
+    }
+  });
+});

uninstall.sh

@@ -245,14 +245,14 @@ assert_test_scope() {
 managed_file() {
   local target=$1 label=$2
   case "$label" in
-    service\ unit|updater\ unit|path\ unit|update\ helper|update\ runner|uninstaller)
+    service\ unit|updater\ unit|path\ unit|update\ helper|update\ runner|admin\ initializer|uninstaller)
       grep -Eiq 'tallynote|TallyNote' "$target" || return 1
       if [[ "$label" == 'path unit' ]]; then
         grep -Fq "$DATA_DIR" "$target" || return 1
       elif [[ "$label" == *unit ]]; then
         grep -Fq "$PREFIX" "$target" || return 1
       else
-        grep -Eq 'TALLYNOTE_INSTALL_PREFIX|/opt/tallynote' "$target" || return 1
+        grep -Eq 'TALLYNOTE_INSTALL_PREFIX|/opt/tallynote|admin-init.js' "$target" || return 1
       fi
       ;;
     environment\ file)
@@ -487,6 +487,7 @@ main() {
   remove_file_if_owned "$UNIT_DIR/tallynote-update.path" 'path unit'
   remove_file_if_owned "$SBIN_DIR/tallynote-update" 'update helper'
   remove_file_if_owned "$LIBEXEC_DIR/tallynote-update-runner" 'update runner'
+  remove_file_if_owned "$SBIN_DIR/tallynote-admin-init" 'admin initializer'
   remove_file_if_owned "$SBIN_DIR/tallynote-uninstall" 'uninstaller'
   remove_config
   remove_data

web-next/src/main.tsx

@@ -90,7 +90,7 @@ function App() {
   if (isSessionBootstrapping(session)) return <main className="tn-auth-shell" role="status" aria-live="polite"><Loading text="正在连接本地账本…" /></main>;
   if (session.status === "error") return <main className="tn-auth-shell"><div className="tn-auth-panel"><h1 className="tn-page-title">无法连接 TallyNote</h1><p className="tn-page-subtitle">{session.error || "请确认本地服务正在运行。"}</p><Button theme="primary" onClick={() => void dispatch(bootstrapSession())}>重新连接</Button></div></main>;
   if (!session.admin) return <LoginPage
-    notice={session.initialized ? undefined : "尚未初始化管理员，请先在服务器执行 pnpm admin:init。"}
+    notice={session.initialized ? undefined : "首次安装还差一步：请在服务器执行 sudo tallynote-admin-init 创建管理员账号。"}
     onSuccess={() => setPasswordOpen(false)}
   />;
   if (session.admin.mustChangePassword) return <ChangePasswordPage admin={session.admin} firstLogin onSuccess={() => notify("密码已更新", "success")} />;

web-next/src/styles/theme.css

@@ -134,7 +134,18 @@ input:focus-visible, textarea:focus-visible, select:focus-visible {
 .tn-user-dropdown-identity { display: grid; gap: 3px; margin: 2px 4px 6px; padding: 8px 9px 10px; border-bottom: 1px solid var(--tn-border-subtle); }
 .tn-user-dropdown-identity strong { color: var(--tn-text); font-size: 13px; }
 .tn-user-dropdown-identity span { overflow: hidden; color: var(--tn-text-secondary); font-size: 12px; text-overflow: ellipsis; white-space: nowrap; }
-.tn-menu-logo { display: flex; width: 100%; height: 64px; align-items: center; justify-content: center; color: var(--tn-navy-900); }
+.tn-menu-logo {
+  /* TDesign adds a left margin to every direct logo child. The logo owns
+     its full-width centering, so that default inset makes the wordmark look
+     visibly shifted to the right in both expanded and collapsed menus. */
+  display: flex;
+  width: 100%;
+  height: 64px;
+  margin-left: 0 !important;
+  align-items: center;
+  justify-content: center;
+  color: var(--tn-navy-900);
+}
 .tn-logo-full { font-size: 18px; font-weight: 750; letter-spacing: .01em; }
 .tn-logo-short { color: var(--tn-blue-700); font-size: 16px; font-weight: 800; letter-spacing: .04em; }
 .tn-menu-icon { flex: 0 0 20px; width: 20px; height: 20px; margin-right: 10px; }